Skip to content

gorouter job from cf/286

Gorouter maintains a dynamic routing table based on updates received from NATS and (when enabled) the Routing API. This routing table maps URLs to backends. The router finds the URL in the routing table that most closely matches the host header of the request and load balances across the associated backends.

Github source: 78dc88f7 or master branch

Properties

metron

port

The port used to emit dropsonde messages to the Metron agent.

Default
3457

nats

machines

IPs of each NATS cluster member

Example
|+
  - 192.168.50.123
  - 192.168.52.123

password

Password for NATS authentication

Example
natSpa55w0rd

port

TCP port of NATS servers

Example
4222

user

User name for NATS authentication

Example
nats

request_timeout_in_seconds

Timeout in seconds for Router -> Endpoint roundtrip.

Default
900

router

backends

cert_chain

Certificate chain used for client authentication to TLS-registered backends. In PEM format.

enable_tls

(optional, boolean) By default, Gorouter forwards requests to backends over unencrypted connections and will ignore routes registered with a TLS port, preferring a non-tls port when both are present. When this property is set to true, Gorouter will connect to backends using TLS when routes are registered with a TLS port, ignoring non-tls ports when both are present.

Default
false
max_conns

Maximum concurrent TCP connections per backend. When set to 0 there is no limit

Default
0
private_key

Private key used for client authentication to TLS-registered backends. In PEM format.

balancing_algorithm

Algorithm used to distribute requests for a route across backends. Supported values are round-robin and least-connection

Default
round-robin

ca_certs

String of concatenated certificate authorities in PEM format, used to validate certificates provided by remote systems. By default, Gorouter will trust certificates signed by well-known CAs and by CA certificates installed on the filesystem.

cipher_suites

An ordered, colon-delimited list of golang supported TLS cipher suites in OpenSSL or RFC format. The selected cipher suite will be negotiated according to the order of this list during a TLS handshake. See https://github.com/golang/go/blob/release-branch.go1.9/src/crypto/tls/cipher_suites.go#L369-L390 for golang supported cipher suites. The first four of these are supported for TLSv1.0/1.1 only. See https://www.openssl.org/docs/man1.1.0/apps/ciphers.html for a mapping of OpenSSL and RFC suite names.

Default
ECDHE-RSA-AES128-GCM-SHA256:TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384

client_cert_validation

none - Gorouter will not request client certificates in TLS handshakes, and will ignore them if presented. Incompatible with forwarded_client_cert: forward or sanitize_set. request - Gorouter will request client certificates in TLS handshakes, and will validate them when presented, but will not require them. require - Gorouter will fail a TLS handshake if the client does not provide a certificate signed by a CA it trusts. For use with Gorouters responsible for app domains only; incompatible with Gorouters responsible for the CF system domain as not all clients provide client certificates.

Default
request

debug_address

Address at which to serve debug info

Default
127.0.0.1:17002

disable_http

Disables the http listener on port specified by router.port. This cannot be set to true if enable_ssl is false.

Default
false

dns_health_check_host

Host to ping for confirmation of DNS resolution, only used when Routing API is enabled

Default
uaa.service.cf.internal

drain_wait

Delay in seconds after shut down is initiated before server stops listening. During this time the server will reject requests to the /health endpoint. This accommodates requests forwarded by a load balancer until it considers the router unhealthy.

Default
20

enable_access_log_streaming

Enables streaming of access log to syslog.

Default
false

enable_proxy

Enables support for the popular PROXY protocol, allowing downstream load balancers that do not support HTTP to pass along client information.

Default
false

enable_ssl

When enabled, Gorouter will listen on port 443 and terminate TLS for requests received on this port.

Default
false

extra_headers_to_log

An array of headers that access log events will be annotated with

Default
[]

force_forwarded_proto_https

Enables setting X-Forwarded-Proto header if SSL termination happened upstream and incorrectly set the header value. When this property is set to true gorouter sets the header X-Forwarded-Proto to https. When this value set to false, gorouter set the header X-Forwarded-Proto to the protocol of the incoming request

Default
false

forwarded_client_cert

How to handle the x-forwarded-client-cert (XFCC) HTTP header. Possible values are: - always_forward: Always forward the XFCC header in the request, regardless of whether the client connection is mTLS. Use this value when your load balancer is forwarding the client certificate and requests are not forwarded to Gorouter over mTLS. In the case where the connection between load balancer and Gorouter is mTLS, the client certificate received by Gorouter in the TLS handshake will not be forwarded. - forward: Forward the XFCC header received from the client only when the client connection is mTLS. This is a more secure version of always_forward. The client certificate received by Gorouter in the TLS handshake will not be forwarded. Requires client_cert_validation: request or require. - sanitize_set: Strip any instances of XFCC headers from the client request. When the client connection is mTLS, the client certificate received by Gorouter in the TLS handshake will be forwarded in this header. Values will be base64 encoded PEM. Use this value when Gorouter is the first component to terminate TLS. Requires client_cert_validation: request or require.

Default
always_forward

frontend_idle_timeout

(optional, integer) Duration in seconds to maintain an open connection when client supports keep-alive. This property must be configured with regards to how an IaaS-provided load balancer behaves in order to prevent connections from being closed prematurely. Generally, this timeout must be greater than that of the load balancer. As examples, GCP has a default timeout of 600 seconds so a value greater than 600 is recommended and AWS ELB has a default timeout of 60 seconds so a value greater than 60 is recommended. However, depending on the IaaS, this timeout may need to be shorter than the load balancer’s timeout, e.g., Azure’s load balancer times out at 240 seconds (by default) without sending a TCP RST to clients, so a value lower than this is recommended in order to force it to send the TCP RST.

Default
900

healthcheck_user_agent

DEPRECATED. Use /health endpoint on port specified by status.port. User-Agent for the health check agent (usually the Load Balancer).

Default
HTTP-Monitor/1.1
Example
ELB-HealthChecker/1.0

isolation_segments

Routes with these isolation segments will be registered. Used in combination with routing_table_sharding_mode.

Default
[]

load_balancer_healthy_threshold

Time period in seconds to wait until declaring the router instance started after starting the listener socket. This allows an external load balancer time to register the instance as healthy.

Default
20

logging_level

Log level for router

Default
info

max_idle_connections

Maximum total idle keepalive connections to backends. When 0, support for keepalive connections is disabled. Maximum idle connections per backend is 100.

Default
0

min_tls_version

Minimum accepted version of TLS protocol. All versions above this will also be accepted. Valid values are TLSv1.0, TLSv1.1, and TLSv1.2.

Default
TLSv1.2

number_of_cpus

Number of CPUs to utilize, the default (-1) will equal the number of available CPUs

Default
-1

offset

Default
0

port

Listening Port for Router.

Default
80

requested_route_registration_interval_in_seconds

On startup, the router will delay listening for requests by this duration to increase likelihood that it has a complete routing table before serving requests. The router also broadcasts the same duration as a recommended interval to registering clients via NATS. This must be less than 60, otherwise monit will mark the process as failed.

Default
20

route_services_recommend_https

Route Services are told where to send requests after processing using the X-CF-Forwarded-Url header. When this property is true, the scheme for this URL is https. When false, the scheme is http. As requests from Route Services to applications on CF transit load balancers and gorouter, disable this property for deployments that have TLS termination disabled.

Default
true

route_services_secret

Support for route services is disabled when no value is configured. A robust passphrase is recommended.

Default
""

route_services_secret_decrypt_only

To rotate keys, add your new key here and deploy. Then swap this key with the value of route_services_secret and deploy again.

Default
""

route_services_timeout

Expiry time of a route service signature in seconds

Default
60

routing_table_sharding_mode

all: all routes will be registered. shared-and-segments: both routes for the configured isolation segments and those that do not have an isolation segment specified will be registered. segments: only routes for the configured isolation segments will be registered.

Default
all

secure_cookies

Set secure flag on http cookies

Default
false

ssl_skip_validation

Skip validation of TLS certificates received from route services and UAA

Default
false

status

password

Password for HTTP basic auth to the /varz and /routes endpoints.

port

Port for the /health, /varz, and /routes endpoints.

Default
8080
user

Username for HTTP basic auth to the /varz and /routes endpoints.

Default
router-status

suspend_pruning_if_nats_unavailable

Suspend pruning of routes when NATs is unavailable and maintain the current routing table. WARNING: This strategy favors availability over consistency and there is a possibility of routing to an incorrect endpoint in the case of port re-use. To be used with caution.”

Default
false

tls_pem

Array of private keys and certificates used for TLS handshakes with downstream clients. Each element in the array is an object containing fields ‘private_key’ and ‘cert_chain’, each of which supports a PEM block. Required if router.enable_ssl is true.

Example
|+
  tls_pem:
  - cert_chain: |
    -----BEGIN CERTIFICATE-----
    -----END CERTIFICATE-----
    -----BEGIN CERTIFICATE-----
    -----END CERTIFICATE-----
    private_key: |
    -----BEGIN RSA PRIVATE KEY-----
    -----END RSA PRIVATE KEY-----

trace_key

If the X-Vcap-Trace request header is set and has this value, trace headers are added to the response.

Default
22

tracing

enable_zipkin

Enables the addition of the X-B3-Trace-Id header to incoming requests. If the header already exists on the incoming request, it will not be overwritten.

Default
false

write_access_logs_locally

Enables writing access log to local disk.

Default
true

routing_api

auth_disabled

When false, Routing API requires OAuth tokens for authentication.

Default
false

enabled

When enabled, GoRouter will fetch HTTP routes from the Routing API in addition to routes obtained via NATS.

Default
false

port

Port on which Routing API is running.

Default
3000

uri

URL where the routing API can be reached internally

Default
http://routing-api.service.cf.internal

uaa

ca_cert

Certificate authority for communication between clients and uaa.

Default
""

clients

gorouter
secret

Password for UAA client for the gorouter.

ssl

port

Secure Port on which UAA is running.

token_endpoint

UAA token endpoint host name. Do not include a scheme in this value; TCP Router will always use TLS to connect to UAA.

Default
uaa.service.cf.internal

Templates

Templates are rendered and placed onto corresponding instances during the deployment process. This job's templates will be placed into /var/vcap/jobs/gorouter/ directory (learn more).

  • bin/dns_health_check (from dns_health_check.erb)
  • bin/drain (from drain)
  • bin/gorouter_ctl (from gorouter_ctl)
  • bin/post-start (from post-start.erb)
  • bin/publish_to_nats (from publish_to_nats.erb)
  • bin/run_gorouter (from run_gorouter.erb)
  • config/certs/uaa/ca.crt (from uaa_ca.crt.erb)
  • config/gorouter.yml (from gorouter.yml.erb)

Packages

Packages are compiled and placed onto corresponding instances during the deployment process. Packages will be placed into /var/vcap/packages/ directory.